Where carpet meets wood floor?

Transition pieces are narrow strips of molding that hide gaps between two different types of floors, such as hardwood and carpets. Floor manufacturers have created several different types of transition strips, depending on the type of floor and the height of the two floors. For this type of installation, use a transition strip called a T-molding. The T-molding is placed in the small space between the floors and has two flanges that rest on both sides of the floor.

To transition from carpets to hardwood floors in your home, use a T-molding set with a rail installation. Transition strips for carpets vary widely, from aluminum strips that are nailed to strips of wood with a metal rod or clip for carpets. The hardwood floor and carpet must be the same height in order to be able to pass smoothly from one to the other without posing a safety hazard. But how do you know how to make the transition from hardwood floors to carpets? We've searched several sources to offer you a selection of ways to go from hardwood floors to carpets.

We hope that the above selection of transitions from wooden floor to carpet helped you make the right choice when it comes to floor transitions. Carpet is a popular choice because of its comfort, but it is not practical in many spaces, making the transition to other flooring materials necessary. Sometimes there are holes along the transition strip that must be carefully placed on the carpet side of the joint so that nails or screws do not enter the hardwood. Cut off the extra part of the carpet that extends beyond the edge of the adhesive strip that faces the wooden floor.

You may be able to make the transition from hardwood floors to carpets without the use of transitional parts if there are some suitable conditions. If the edge of the carpet is exposed, it can fray, so this method will also solve that problem. An adhesive strip has small metal hooks that hold the carpet in place, preventing the carpet from coming loose from its position on the subfloor. Cutting too much can leave a telegraphic effect on the carpet over time, and cutting too long can affect the carpet remaining stretched over the pins of the adhesive strip.

To go from hardwood floors to carpets if the two floors are uneven, one technique that can work is to fold approximately the last inch of the carpet underneath itself and nail it. If you find yourself with a wooden floor that is the same height as a carpet, a T-bar transition strip may be the right transition strip for you. Each material needs some type of finish along its edge, and different materials usually cause changes in floor height, as well as in the characteristics of the soles of the feet (for example, a soft and flexible carpet that becomes a cold and stiff tile). This peel-and-stick version of a transition strip is designed for easy application in the transition from wooden floor to carpet.

In this case, it is approximately a quarter of an inch superimposed on the hardwood; ideal for a good quality carpet.

Leave a Comment

All fileds with * are required